메뉴바로가기

본문 바로가기 주메뉴 바로가기

Products

Heatset Ink

Quality Heatset Printing Ink

Outline Features
SPECTRUM VIO is a cost effective, environmentally, low-carbon emitting, low-temperature drying heatset process ink series, based on original resin development technology, that features reduced drying time to speed up printing and help reduce production costs. It also achieves very good print results with first-rate lithographic properties, ink transfer and fast setting.
  • Eco-friendly vegetable oil based ink
  • Quick ink-water balance and wide water window
  • Fast drying time
  • Excellent ink transfer and excellent dot reproducibility
  • Very good post-processability for stable print quality
  • VOC content less than 1%
  • Eco-friendly products using AROMATIC FREE solvent
  • Suitable for printing with or without Isopropyl alcohol
  • International Standard ISO 2846-1, ISO 12647-2 compliance
  • Compliance with ROHS, REACH, ASTM F-963, EN 71-3
0(bad) - 10(good) 0 5 10
Color density 8
Gloss 7
Rub Resistance 7
Set 8
Stability 9
Lithographic performance 9

RESISTANCE

Lightfastness Alcohol resistance Alkaline resistance Foil Lamination Ability UV Varnish Ability Aqueous Coating Ability
YELLOW 5 + + + + +
MAGENTA 5 + - + + -(*)
CYAN 8 + + + + +
BLACK 8 + + + + +

Scroll right to see more tables.

* Due to potential colour shift, it is advised that test prints are made before starting a production run.

* We recommend testing the drying behaviour and adhesion on the respective substrate before the production run.

STORAGE AND PACKING

Only store the ink in a specified place at ambient temperature – ideally the temperature range should be 18 -25 ‘C.
5kg Can / 20kg Pail / 200kg Drum / 900kg Conicube / 1,000kg Fluid bag

SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS

KMI inks are formulated based on EU regulations, EU REACH and for detailed information, please refer to recent GHS MSDS.

This data sheet is for information and reference when using KMI inks. It is correct to the best of KMI’s knowledge. No liability for any errors, facts or opinions is accepted. Customers must satisfy themselves as to the suitability of this product for their application. During application, performance of the product can be affected by various factors which are beyond the control of KMI, so it is highly recommended that a test print is made before committing to a production run. The information contained herein may be modified without prior notice.

TOP